WS_FTP For Windows Users
In order to FTP into your website you will need the following information.


When you have this information, and a copy of WS_FTP installed on your computer you will be ready to setup a Session Profile and FTP into your website.

1. Launch your WS_FTP program. A panel titled Session Profile will be displayed with the WS_FTP program window behind it.

2. Under the General tab, click the New button and type a Profile name into the Profile Name entry box at the top of the panel. This can be any name you choose, "My Website" for example.

3. Enter the appropriate information into the following entry boxes:
Host Name/Address: Enter
Host Type: Select UNIX (standard) from the menu
User ID: username (lowercase)
Password: password (lowercase)
Check the Save Password box if you wish.
Leave the other entry fields blank.

4. Click on the Apply button at the bottom of the panel to save this Profile. This will eliminate the need for you to enter this information the next time you launch WS_FTP

5. Type in public_html in the Initial Remote Directory under the Startup tab. You don't have to fill out anything else on the other tabs. Click Apply.

6.Click on the OK button at the bottom left of the panel. WS_FTP will now attempt to connect to your website. When you are connected to your home directory on the server, the Profile panel will close.

Left Window
WS_FTP will now display a split screen. The window on the left contains the folders and files on your own computer. Use the green arrow at the top of the window and the scroll bars to browse your system.

Right Window
The window on the right will contain the folders and files contained within your home directory. This is your space on the server. This is where you will place your website will be.

Binary vs. ASCII or Auto
You will see two radio buttons below the display windows, one labeled Binary and one labeled ASCII. There will also be a check box labeled Auto. If you select Auto WS_FTP will automatically apply the correct setting, either Binary or ASCII to the document you are transferring. If you elect not to use the Auto setting please note that it is very important to transfer images in Binary mode. Everything else, HTML documents, cgi scripts etc. should be transferred using ASCII mode. If you fail to set this correctly your files may not appear as they should.

Upload Files
1. Double click on the www directory in the right window to open it. This is the directory you will upload your web pages, files, images etc. into.
2. Highlight a file (or files) from your computer in the left window.
3. Click the right arrow button (->) in the center bar between the windows.
4. You will see a note in the status bar at the bottom when your file transfer is complete.

Download Files
1. Double click on the folder you want to download files into on your computer to open it in the left window.
2. Highlight the file (or files) you wish to download from your website in the right window.
3. Click the left arrow button (<-) in the center bar between the windows.
4. You will see a note in the status bar at the bottom when your file transfer is complete.

Create A New Directory (Folder)
To create a new directory on your website, click on the MkDir button when you are inside the www directory or a subdirectory of the www directory. You will be prompted to enter a name for the new directory. Once you do this, the new directory will be created.

Multiple File Transfer
To transfer more than one file at a time, highlight the first file, and then hold down the Control key on your keyboard to select more. All highlighted files will be transferred when you click on the appropriate arrow button to begin the transfer.

When you are finished transferring your files, click on the Close button at the bottom of the WS_FTP window. This will close your FTP connection.

Error problems

If you get an error that states "503 NO > PORT command given". Go to Advanced and uncheck Passive transfers. Click Apply.

Copyright © 2005 - 2016 - QuestMatrix Website Solutions - All Rights Reserved